The Maywood Standard Series Plywood Top with Aluminum Flush
Plywood Tops Clear faced plywood: 5/8" thick, sanded smooth, without voids and patches, sealed on both sides with protective walnut stain.
High Pressure Laminate Tops Plywood core: 5/8" thick plywood, sanded smooth, without voids and patches. Laminate: .050 thick high pressure laminate on top as well as a .050 thick backer sheet on underside. Any laminate top over 60" wide must be seamed.
Mayfoam Tops Mayfoam tops are constructed of 5/8" thick plywood, sanded smooth, without voids and patches. Rectangular table tops are 3/8" thick. A 1/16" expanded vinyl sheet is permanently bonded to the top.
Vinyl Flush Edge Molding is a black flat vinyl “T” edge. Available on all high pressure laminate tops and all plywood tops.
Crimped Aluminum Edge Molding is high-pressure crimped to the top. Available on all plywood tops, all high pressure laminate tops, and all Mayfoam tops.
Wishbone shaped legs. The 18" wide tops have "H" style legs, 24" wide tops have a choice of wishbone or "H" style legs.
Leg material: 1" diameter, 16 gauge cold rolled steel tubing.
All metal parts are powder coated.
Continuous weld joints.
Glides: black plastic, pressed into end of leg.
Hinged diagonal brace allows legs to fold.
Locks positively in opened and closed positions.
Secured to top with flush flat head carriage bolts, lock washers and nuts.
Finish: silver powder coated
Full length wood runners attached with carriage bolts and nuts stiffen top and facilitate stacking.
Folded thickenss: Rectangular - 2 1/16" Rounds - 3 1/4"